Located in Hangzhou Donghu High-Tech Biomedicine Industrial Park, Hangzhou Aichong Biotech Co., Ltd. has been focusing on the R&D, production...
CONTACT
-
ADD
Building 36, No. 488-1, Donghu North Road, Donghu Street, Linping District, Hangzhou City, Zhejiang Province
-
TEL
-
MAIL
Copyright © 2023 Hangzhou City
English
French
Spanish
Product
(CCV Ag) Canine coronavirus antigen test
Canine Coronavirus (CCV) Antigen Rapid Test Kit is a chromatographic immunoassay for the qualitative detection of Canine
Coronavirus antigen in canine stool(feces).
The invisible anti-CCV antibody (T line) and secondary antibody (C line) are imm
Canine Coronavirus (CCV) Antigen Rapid Test Kit is a chromatographic immunoassay for the qualitative detection of Canine
Coronavirus antigen in canine stool(feces).
The invisible anti-CCV antibody (T line) and secondary antibody (C line) are immobilized on a nitrocellulose membrane in result window.
Another anti-CCV antibody is conjugated with colloidal gold particle and immobilized on glass fiber as conjugate pad. When specimen is
applied into the sample well on device, CCV antigen will bind to the gold conjugate and migrate on the surface of test strip by passive
diffusion, and a visible T line will appear in result window after 10 minutes. The C line has to appear every time when a test is properly
performed.
1. Test Devices: 10 pieces test devices individually pouched.
2. Assay diluent in tube:10 units
3. Disposable swab:10 pcs
4. Disposable dropper cap:10 units
5. Work station:1 unit
6. Instructions For Use: 1 copy attached.
1. The test device, specimen, assay diluent should be brought to room temperature (15~30°C) prior to use.
2. Place the assay diluent tube on the work station and tear off the aluminum film.
3. Collect canine stool(feces) using a swab ,then insert the swab into the assay diluent.
4. Mix the swab until the specimen dissolves completely into the assay diluent (Approximately 10sec).
5. Squeeze the solution from the cotton swab as much as possible, then discard the cotton swab and cover the tube with dropper cap.
6. Wait for 2 minutes to precipitate large particles.
7. Remove the test device from the foil pouch, and place it on a flat and dry surface.
8. Add 3 drops of assay diluent drop by drop into the specimen well on device vertically, and start the timer.
9. Read the results at 10~15 minutes. Any results after 15 minutes are no longer valid.
 | Positive result: Test line (T) and control line (C) within the result window indicate the presence of CCV antigen. Negative result: Only control (C) line appears in the result window indicating that CCV antigen has not been detected. Invalid result: If the control (C) line does not appear, the result might be considered invalid. The specimen should be retested. |